R. S. Foils manufactures a range of hard Aluminium in a completely hygenic condition which can effectively protect from moisture, micro-organisms, light, oxygen and other gases making it a primary material in the protective packaging of tablets, Capsules and injectables.
Thanks to the annealing temperature and final conditioning processes during its manufacturing. It is non hazardous to health, contains no plasticizers and is environmentally friendly. Coupled with flexibility and formability, the ease with which aluminium foil can be coated, printed, laminated, slitted, and cold-formed and embossed qualifies it as an extremely versatile tool for the pack designer.
4 to 6 GSM OR 6 to 8 GSM (as per the customer need)
Bond Strength with PVC or PVDC
≤ 10 N (1000 grams/15 mm Strip)……(when sealed at 180°C, 0.5 second dwell time and 3-4 Bar sealing Pressure)
Pin Hole Count
20 Microns:70% of the reels with ZERO pin holes & the remaining
may have maximum 10 only/ meter ² area.
25 Microns & 30 Microns: Zero Pin Holes
Unprinted: Can be supplied in any width from 45 mm to 925mm (Wandering Tolerance±1.0mm)
Printed: Can be supplied in any width from 45mm to 610mm (Wandering Tolerance±1.0mm )
1. Up to 8 Colours
2.Front and Back Registered
3. High Temperature Heat Resistance Printing.
4.UV Inks Printing.
Unprinted Foils: Surface for printing shall be on top side and Surface for sealing shall be on the reverse/bottom side.
Printed Foils: Printed surface on the Top Side and the Sealing surface shall be on the revers/bottom side.
IR SPECTRA Consistency
Safe for Food Contact
Shall be in accordance with BFR XXII, FDA-175-300 &EU Directive 2002 / 72 & 2005/79.